Biostar P4M800-M7 Manuel du propriétaire télécharger pdf (Page 13)

P4M80-M7 & P4M80-M7A

Step 2-2:

Step 3: Hold the CPU down firmly, and then close the lever to complete

the installation.

Step 4: Put the CPU Fan on the CPU and buckle it. Connect the CPU FAN

power cable to the JCFAN1. This completes the installation.

2.2 FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan

wiring and plug may be different according to the fan manufacturer.

Connect the fan cable to the connector while matching the black wire to

pin#1.

CPU FAN Header: JCFAN1

Pin Assignment

1 Ground

2 Power (+12V)

3 FAN RPM rate sense

JCFAN1

4 Smart Fan Control

System Fan Header: JSFAN1

Pin Assignment

1 Ground

2 Power (+12V)

JSFAN1

3 FAN RPM rate sense

Note:

The JCFAN1 and JSFAN1 support 4-pin and 3-pin head connector.

When connecting with wires onto connectors, please note that the red

wire is the positive and should be connected to pin#2, and the black

wire is Ground and should be connected to GND.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 66 67

Pas de commentaire

Biostar P4M800-M7 Manuel du propriétaire Page 13