Biostar GeForce 6100-M7 Manuel du propriétaire télécharger pdf (Page 51)

GeForce 6100-M7

UART Mode Select

This item allows you to determine which Infra Red (IR) function of onboard

I/O chip.

The Choices: Normal (default), AS KIR, IrDA.

UR2 D uple x Mo de

Select the value required by the IR device connected to the IR port.

Full-duplex mode permits simultaneous two-direction transmission.

Half-duplex mode permits transmission in one direction only at a time.

The Ch o ice s: Half (default), Full.

Onboard Parallel Port

This item allows you to determine access onboard parallel port controller

with which I/O Address.

The Choices: 378/IRQ7 (default), 278/IRQ5, 3BC/IRQ7, Disabled.

Parallel Port Mode

The default value is SPP.

The Choices:

SPP (default) Using P aralle l port as Standard P rinter Port.

EPP Using P aralle l P ort as Enhanced Parallel P ort.

ECP Using Parallel port as Extended Capabilities Port.

ECP+EPP Using Parallel port as ECP & EPP mode.

ECP Mode Use DM A

Select a DMA Channel for the port.

The Choices: 3 (default), 1.

OnChip USB

This option should be enabled if your system has a USB installed on the system board.

You will need to disable this feature if you add a higher performance controller.

The Choices: V1. 1+V2. 0 (default), Disabled, V1.1

USB Memo ry T ype

The Choices: SHADOW (default), Base Memory (640k)

USB keyboard Support

Enables support for USB attached keyboard.

The Choices: Disabled (default), Enabled

USB Mo use Suppo rt

Enables support for USB attached mouse.

The Choices: Disabled (default), Enabled

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 60 61

Pas de commentaire

Biostar GeForce 6100-M7 Manuel du propriétaire Page 51