Biostar I915P-A7 Manuel du propriétaire télécharger pdf (Page 52)

I915P-A7 BIOS Manual

5.1.5 On-chip Secondary PCI IDE

This item allows you to enable or disable the primary/ secondary IDEChannel.

The Choices: Enabled (Default), Disabled.

5.1.6 IDE Primary/Secondary/Master/Slave UDMA

Ultra DMA/100 functionality can be implemented if it is supported by

the IDE hard drives in your system. As well, your operating

environment requires a DMA driver (Windows 95 OSR2 or a third

party IDE bus master driver). If your hard drive and your system

software both support Ultra DMA/100, select Auto to enable BIOS

support.

The Choices: Auto (default), Disabled.

5.1.7 On-Chip Serial ATA Setting

T his item allows you to choose:

Disabled: disabled SATA Controller

Auto: auto arrange by BIOS.

Combined Mode: PATA and SATA are combined max of 2 IDE drivers

in each channel.

Enhanced Mode: enabled both SATA and PATA max of 6 IDE drivers

are supported.

SATA Only: SATA is operatin g in legacy mode.

The Choices: Default (default), Auto, Combined Mode, Enhanced

Mode, and SATA only.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 65 66

Pas de commentaire

Biostar I915P-A7 Manuel du propriétaire Page 52